Featured Products
-
UV Glue Dispensing & Curing Machine
Model: GDP-200s
All in one machine with UV glue dispensing and fast & powerful LED light curing system, safe UV wave-length selectable 365/385/395/405/415nm, applying for Camera module, BGA UV Encapsulants, LCD, TP Curing …etc. varied applications.
-
Automatic V-Cutting Machine
Model: VCUT860INL
Automatic V-scoring Machine is applying to de-panel the PCBAs with V-scoring design, this machine is able to de-panel the PCBAs with “cross” v-scoring design, no operator needed, saving head count.
High efficiency, High precision and Low-cost automatic solution.
-
FPC Die Cutting Machine
Die Cutting Machine is applying to de-panel the Rigid pcb, Flexible pcb (FPC), Rigid-Flexible pcb （combination boards） with High efficiency, High accuracy and Low investment cost.
-
UV Spot Curing System
Model: SpotUV
LED UV spot curing system delivers optimized curing energy to a very precise location, can be used manually by an operator in a bench-top system or integration into a high-speed automated assembly line; typically cure LED light-curable adhesives and coatings in 1 to 10 seconds.
-
Inline One-way V-CUT Machine
- Inline One-way V-CUT Machine -
F550 is a one-way online V-CUT machine, which is mainly used for pcb on-line machine with one-way V-CUT slot, without direct human intervention and saves labor; This series is mainly used for the low-stress depaneling of PCBA with V-CUT design of SMT back end to minimize the stress damage caused by the process to the side parts. Series of models adopt PLC control, industrial computer control and precision motor control, to achieve quantitative precision control of each key production process, and has convenient HMI interface and rich software functions, which greatly facilitates the use of users. This series of models have automatic transfer docking (SMEMA) upstream production track, and can be cut through ESD belt line or with a Robot to achieve the tray output.
-
Automatic In-line V-CUT Machine Model: JK-860R
Automatic inline V – CUT machine used to de-panel the PCBA panel with design of one-way & cross V-score lines, inline through the upper conveyor, automatic feeding the PCBA panel; The built-in robot sucks PCBA panel and puts it onto the bottom fixture; After the CCD automatically verifies the mark point of PCBA, the program controls the rotatable upper round blade to move to realize automatic de-paneling; when the de-paneling is completed, the robot will pick up the small de-paneled PCBA and place them on the outlet flat belt and put the waste tabs into the bottom collection bin.
-
Solder Dross Recovery Machine SD10MS
Model: SD10MS
Solder bar usage saves at least 50%, the alloys separation rate is up to 98%, economic design with a small footprint and easy to transport; offline operation without dust, High recovery ration, high capacity.
-
Solder Dross Recovery Machine SD800
Model:SD800
Solder bar usage saves at least 50%, the alloys separation rate is up to 98%, economic design with a small footprint and easy to transport; offline operation without dust, High recovery ration, high capacity, automatic solder bar molding.
